OKS 2101 / OKS 2101-ST mould protection (anti-corrosion) spray
Key features
* Wax-based protective coating for metal surfaces.
* Protects against rust and corrosion for up to 2 years under suitable storage conditions.
* Dries to a clean, touch-dry film.
* Water-resistant and weather-resistant.
* Compatible with lubricants; degreasing before use is generally not required.
* Suitable for spare parts, moulds, tools, machine components, and metal surfaces stored for long periods.
Technical data
| Operating temperature range | −40°C to +70°C |
| Salt spray resistance | over 1,000 hours (50 µm film thickness) |
| Typical packaging | 400 ml aerosol spray |
| Application | Industrial Use |
Applications
- Injection moulds and metal mould storage.
- Machine parts and spare components.
- Bearings, shafts, tools, and metal assemblies.
- Protection during shipping and long-term warehousing.
How to use
- Clean and dry the metal or mould surface.
- Shake the can thoroughly.
- Spray an even thin coat over the surface.
- Allow the protective film to dry.
- Remove the film when the component is ready for use if necessary.
